1、Mono Semi-Flexible solar panels
2、The maximum withstand system voltage is 100DV
3、Lightweight and thin: Only 3.0KG
4、The panel size: 1360*670*3mm
5、TPT material for surface coating
6、Two kinds of junction boxes are optional
The safety maximum withstand system voltage up to 100DV service life of 10 years followed by the appearance of the battery does not exist white C point, more in line with the aesthetic needs of the user; and the conversion rate can reach 17.6 %.
Unique mesh design, based on direct light, higher light utilization and less shadow, low temperature coefficient, power temperature coefficient -0.3938% / °C. In the summer when the outside temperature reaches 80 °C, with Multi-wire electrode technology, the front and rear ends of the link can be used as a heat sink and help absorb heat from the surface, reduce power loss. Widely used in real estate, lawn vehicles, yachts, golf carts, light roofs and so on.
The short distance between the multi-gate lines can greatly increase the current during the transmission process. The long distance between the conventional solar cell buses generates more power loss during the transmission process.
Unique mesh design, based on direct light, higher light utilization and less shadow.
|Component Model||Lucis-50W A||Lucis-80W A||Lucis-100W A||Lucis-160W A|
|Voltage at Pmax(Vmp)||17.2||17.2||17.2||17.7|
|Current at Pmax(Imp)||2.94||4.65||5.89||9.06|
|Open circuit voltage(Voc)||20.4||20.4||20.4||20.6|
|Short -circuit current(Isc)||3.12||4.92||6.24||9.60|
|The maximum system voltage||100VDC(IEC)||100VDC(IEC)||100VDC(IEC)||100VDC(IEC)|
|Power temperature coefficient||-0.393%/ ℃||-0.393%/ ℃||-0.393%/ ℃||-0.393%/ ℃|
|Voltage temperature coefficient||-0.30%/ ℃||-0.30%/ ℃||-0.30%/ ℃||-0.30%/ ℃|
|Current tempwerature coefficient||0.039%/℃||0.039%/℃||0.039%/℃||0.039%/℃|
|Output power tolerance||±3%||±3%||±3%||±3%|
|Data under standard testing conditions(STC):1000W/M²; 1.5AM|
|Contruction||surface TPT||surface TPT||surface TPT||surface TPT|
|backboard TPT||backboard TPT||backboard TPT||backboard TPT|
|No.of cells and connections||4*8||4*8||4*8||4*8|
|Maximum bending arch height||20mm||40mm||70mm||150mm|
|Warranty: for 1 year and service lift of years.|