TF Series
Flexible Solar Panels
Tough Enough to Take a Hit. Strong Enough to Step On.
Purpose-built for off-grid energy — from RVs to marine decks and outdoor power systems.
Extreme Impact Resistance
Step-on Ready
Ultra-Lightweight Design
High Conversion Efficiency
Outdoor-Ready Durability
Deep Dive: What Makes TF Series Different?
High conversion efficiency
TF series uses the latest high-efficiency monocrystalline cells or Sunpower cells. Monocrystalline cells can achieve efficiencies of up to 22.8% and SunPower cells of up to 24.4%. This flexible solar panel has a higher conversion efficiency and can provide you with more power.
Extreme Durability
Built with advanced polymer composite and ETFE materials, TF panels resist corrosion, UV, and moisture — keeping stable output in salty air, rain, and strong sunlight.
Reinforced for Impact & Foot Traffic
TF Series panels are built with a reinforced multi-layer composite structure that absorbs impact and disperses pressure. With optimized cell spacing and a wear-resistant surface, they withstand physical stress like stepping and handling — without cracks or performance loss.
TF Series
14,700-Step Foot Traffic Simulation
Real-world foot traffic tested over 49 days with power loss less than 3% and zero structural failure.
IP68 Waterproof & Dustproof IP68
Submerged 1m for 60 minutes — no water ingress.Exposed to 8 hours of vacuum dust — no dust entry.Certified to IEC 60529.
672-Hour Salt Mist Resistance
Complies with IEC 61701: Power degradation below 2% after 672 hours in high-salt, humid conditions.
260mm Flexibility Test
bent to 260mm arc for 5 minutes — no microcracks or damage observed via EL imaging.
Certifications
TF series
TF Series is fully certified with CE ,ROHS standards, ensuring top-tier safety and environmental compliance.
Designed for the Demands of Real-World Applications
TF Series in
Action
| Model | SG-TF-M2-55W | SG-TF-M2-100W | SG-TF-M2-115W | SG-TF-M2-140W | SG-TF-M2-170W | SG-TF-M2-210W | SG-TF-M2-255W | SG-TF-M2-285W | SG-TF-S-55W | SG-TF-S-110W | SG-TF-S-155W | SG-TF-S-210W | SG-TF-S-255W | SG-TF-S-295W |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Voc | 21.8V | 28.5V | 22.3V | 27.1V | 24.5V | 40.7V | 48.9V | 27.1V | 23.3V | 23.3V | 32.1V | 43.8V | 52.5V | 58.4V |
| Vmp | 18.6V | 24.4V | 19.1V | 23.2V | 20.9V | 34.8V | 41.8V | 23.2V | 19.8V | 19.8V | 27.3V | 37.2V | 44.6V | 49.6V |
| Isc | 3.1A | 4.3A | 6.32A | 6.34A | 8.54A | 6.34A | 6.4A | 12.9A | 2.94A | 5.89A | 6.02A | 5.98A | 6.06A | 6.30A |
| Imp | 2.96A | 4.1A | 6.03A | 6.04A | 8.14A | 6.04A | 6.11A | 12.29A | 2.78A | 5.56A | 5.68A | 5.65A | 5.72A | 5.95A |
| Max System Voltage | 600V DC(IEC) | 200V DC(IEC) | ||||||||||||
| Solar cells | Monocrystalline | sunpower cell | ||||||||||||
| Cell Efficiency | >22.7% | >24.4% | ||||||||||||
| Color | black/white | |||||||||||||
| Warranty | 6 years | |||||||||||||
| Weight | 1.15kg | 1.92kg | 2.26kg | 2.7kg | 3.29kg | 3.95kg | 4.73kg | 5.34kg | 1.3kg | 2.5kg | 3.4kg | 4.6kg | 5.5kg | 6.1kg |
| Dimension | 840*395*3mm | 960*580*3mm | 1110*590*3mm | 1020*765*3mm | 1220*780*3mm | 1495*765*3mm | 1790*765*3mm | 1500*1030*3mm | 560*550*3mm | 1070*540*3mm | 1450*540*3mm | 1335*800*3mm | 1590*800*3mm | 1335*1050*3mm |
What Our Partners Are Saying
FAQs
A: Yes—Sungold’s TF series with SunPower cells withstands a 100 kg point load over an 8 cm × 8 cm area (~150 kPa) without micro-cracking. Avoid hard-soled shoes or sharp objects, and add a removable tread mat on decks with frequent traffic to limit long-term power loss to about 2–3 % per year.
Yes, customization is available for both Sunpower and monocrystalline models. We offer flexible ODM solutions for projects and distributors.
Most ETFE flexible panels deliver 6 years of full-sun service. Lab cycling tests show heat spots and edge-seal fatigue are the main failure modes; choose models with multi-branch diodes and marine-grade potting to push life toward the 5-year mark.
Pick modules with string-level bypass diodes or Sungold’s Anti-Shading circuit; power loss stays below 17 % when one section is blocked. Legacy single-string designs can drop to zero under the same shade.
In most cases, we do not recommend bonding standard flexible modules directly onto metal roofs. The metal substrate conducts heat, raising cell temperature and accelerating polymer aging. Roof installations must also satisfy fire-resistance, wind-uplift, and electrical-insulation codes, yet many lightweight panels lack certifications such as UL 790 / IEC 61730 (fire rating) and ASTM E330 (wind load).
If lightweight, curved mounting is essential, choose a product that has passed UL 94 V-0 flame rating, IEC 61701 salt-mist, and UL 1703 Class A fire tests—for example, the Sungold PA219 flexible panel—and pair it with dedicated insulating pads plus mechanical fasteners rather than relying solely on adhesives.
Yes, we export to 20+ countries across Europe, North America, and Asia.
EXPLORE
Leave a Message
If you are interested in our products and want to know more details, please leave a message here and we will get back to you as soon as possible.
